With the stair climbing robot Domino, you can go up and down any type of staircase easily and safely.
It can travel over any type of flooring thanks to its special non-staining and non-scratching crawler tracks.
The electric stair climber Domino can also be used outdoors on uneven surfaces such as grass, gravel, dirt etc., without requiring the operator to keep the load balanced.
With the new Automatic feature, DOMINO automatically tilts the load on the stair; the operator simply has to drive it through the joystick. So much technology to make transport easier and safer than ever.
With DOMINO Automatic stair climber the operator can choose at any time whether and when to switch to manual mode.
The independent crawler tracks with double electric motor guarantee maximum manoeuvring comfort even in narrow spaces. It is operated with a proportional joystick. This stair climbing robot is easy-to-use and intuitive.
The weight is always distributed evenly on the staircase, so that the operator does not have to keep the trolley balanced. Thanks to its special crawler tracks, the load always remains safe, with no risk of slipping.
The independent crawler tracks with double electric motor guarantee maximum manoeuvring comfort even in narrow spaces.
Thanks to the electric actuator, the load angle can be adjusted in order to keep it upright and balanced at all times.
Non-marking and non-slipping crawler tracks, suitable for all indoor and outdoor surfaces.
You are no longer restricted by the height of the steps, since it can also go up irregular steps.
It is operated with a proportional joystick, making it easy-to-use and intuitive.
Domino allows loads to be moved also on flat surfaces, both indoors and outdoors.
The electric stair climber Domino can be equipped with a range of optional accessories so that it perfectly meets every need.
DOMINO Automatic automatically adjusts the load tilt on the stair, relieving much stress during transport to the operator.
Available load capacities
160 Kg (352 Pounds), 300 Kg (661 Pounds) and 400 kg (881 Pounds)
950 x 525 x H 1145 mm. Height of the load surface from the ground: 132 mm
Height-adjustable handle. The frame can be removed to take up less space on the vehicle.
Travel speed on stairs (adjustable thanks to the proportional joystick)
Domino 160 kg: 200 mm/s
Domino 300 kg: 125 mm/s
Domino 400 kg: 80 mm/s
Type of battery
Silicon without memory effect.
Domino 160 kg: about 1,000 steps
Domino 300 kg: about 750 steps
Domino 400 kg: about 500 steps
Very narrow due to the vertical position of the load and independent crawler tracks.
Minimum space for manoeuvre on the landing
Click here to see all details
DOMINO is always equipped with 1 strap to tie the load, 1 battery pack provided as standard, 1 automatic battery charger 220/24V, 2 swivel wheels for manual movement on a flat surface, and 1 standard base width 50 cm x 62 cm depth.
The company Zonzini Srl has the right to make changes and/or improvements to the products and/or components at any time, also without prior notice.
It is a highly useful and essential base for those who carry photocopiers.
It is equipped with sliders that allow operators to load and unload photocopiers onto the DOMINO base.
The sliders have been designed to be “retractable”, therefore, once the operation has been completed, they are slid under the base of the trolley to occupy the smallest amount of space possible.
The closed base has a 51 cm width. It can be adjusted up to 70 cm, according to the width of the photocopier to be transported.
It is a special base that allows the support base of the load to be increased. It can be extended in width up to 80 cm.
This accessory provides load support on four wheels, therefore it is suitable for the manual transport of loads on uneven surfaces such as roads, pavements, etc.
When you have reached the stairs, the wheeled base allows you to start directly going up the stairs, without wasting any time and without any effort.
The aluminium ramp is useful to load and unload any type of goods directly from the van using DOMINO.
The measurements of the standard ramp are: 67 cm x 8 cm x 200 cm. Upon customer request, ramps with customised measurements can be provided.
It is used to move the load in a tilted position on the van. It is ideal for long loads on relatively low vans. It is attached directly to the frame of DOMINO and is equipped with swivel wheels.
Simple and easy-to-use. It offers the advantage of avoiding the first step of the next flight of stairs and to manoeuvre the load in even narrower spaces.
It is useful in the case of vans with low loading height. This accessory allows photocopiers to be loaded/unloaded from the van while outside, so that the photocopier dictates the limits of space, without the trolley affecting this.
DOMINO directly goes up onto it by using the crawler tracks. This accessory is equipped with a telescopic structure that allows the feet to be adjusted according to the height of the van, and moves on swivel wheels.
Why choose Domino Automatic by ZONZINI
Watch the video.
Look at the accessories
Look at the mistakes to be avoided